Liking This File Will Add It to My Favorites:

Add-ons, Easy Project, Terrarium

Multi-Way Connector Set (10mm)

Interconnect an array of ant farms or build custom plumbing or misting lines in your vivarium with the 10mm Tubing Connector Set! This utility pack includes essential connectors like the 3-way, straight, elbow, and 4-way junction, all precisely designed for a secure, tight fit with standard 10mm rubber hose.

The connectors must be printed accurately for a tight, leak-free fit, requiring supports depending on the specific model’s orientation. This is a functional, water-safe print suitable for FDM or Resin, perfect for customizing your habitat’s internal systems.

Download This STL File

(Non-Commercial License)

—– OR —–

Memberships starting at $14/month

-Unlimited Downloads

-Commercial License Available

-Cancel Anytime

_
Get Unlimited Downloads

Share This Design:

Recommended Settings

Assembly & Installation

Changelog

Recommended Settings

⚙️ Recommended Print Settings

Dimensional accuracy is critical for these connectors to prevent leaks. Water-safe materials are mandatory.

FDM/Filament Settings (Recommended for Structure & Size)

Material: PETG or ABS/ASA are highly recommended due to the water contact and need for durability.
Layer Height: 0.2 mm or 0.16 mm. Use a finer layer height for better threading/fitting surfaces.
Infill Density: 20-30%. Necessary for structural integrity under hose pressure.
Wall/Perimeter Count: 4. Crucial for strength and preventing porosity.
Supports (CRITICAL): Supports are REQUIRED for the complex joints (3-way, 4-way) and the inside curve of the elbow to maintain a smooth, dimensionally accurate fit for the hose.

SLA/Resin Settings (Recommended for Detail)

Material: Standard UV Resin (ensure it’s structurally sound).
Layer Height: 0.05 mm or finer.
Supports (CRITICAL): Supports are REQUIRED for complex joint structures to ensure dimensional accuracy.
Calibration: Ensure your resin printer is calibrated for minimal dimensional shrinkage.

Important: Dimensional calibration is essential! We recommend printing a test piece before batch printing to ensure the 10mm hose fits tightly.

Assembly & Installation

🛠️ Preparation & Post-Processing Steps

These parts require proper cleaning and careful assembly to prevent leaks.

Slicer Preparation

Supports: Supports are REQUIRED for the 3-way, 4-way, and elbow connectors. Check your slicer preview carefully.
Hollowing: Not required. Print solid.
Assembly: No glue required. The connectors are designed to be a tight push-fit onto the 10mm hose.

Assembly

Preparation: Print the desired connector. Carefully remove all supports and clean the internal surfaces to ensure a smooth hose path.
Fitting: Firmly push the 10mm hose onto the connector barbs. For a very tight fit, briefly heat the end of the rubber hose with a hairdryer before installation.

Cleaning (CRITICAL)

Before placing these components into your habitat’s water system, wash them thoroughly with hot, non-soapy water. A final thorough rinse is mandatory.

📦 Required External Tools

The following material is required to complete the functional connection system and is not included with the STL files.

10mm Rubber Hose: A Standard 10mm (inner diameter) rubber or silicone hose is required to fit these connectors for a leak-proof seal.

Changelog

📝 Changelog

Keeping our designs current and addressing user feedback is a priority. This tab will track all official updates to the STL files found in this download.

Version V1.0

Date: 11/30/2025
Notes: Initial Release. Clean STL files provided for 3-way, 4-way, and elbow connectors. Supports are required for complex parts.

Ask Questions, Give Feedback, Show Us How It Turned Out...

Responses

You must be logged in to post a comment.