Achieve a clean, professional finish on your enclosure ports with the Standard Port Plug & Cover Cap Set! This two-part system provides a secure, twist-fit seal for your ports and includes a decorative cap for a clean, finished look.
This set is designed for support-free printing, making preparation quick and easy. Simply print the plug and cap, assemble, and use. The plug is suitable for both dry terrariums and aquatic setups, though a gasket is required for any water-retaining use.
Share This Design:
Dimensional accuracy is critical for a secure, push-fit seal. This design is optimized for a simple, support-free printing experience.
Material: PETG or ABS/ASA is highly recommended due to the need for a long-lasting, tight seal in humid environments.
Layer Height: 0.2 mm or 0.16 mm. Use a finer layer height for better dimensional accuracy on the sealing surfaces.
Infill Density: 20-30%. Provides necessary rigidity for the push-fit mechanism.
Wall/Perimeter Count: 4. Crucial for strength and sealing.
Supports: NO SUPPORTS REQUIRED.
SLA/Resin Settings (Recommended for Detail)
Material: Standard UV Resin (ensure structural integrity).
Layer Height: 0.05 mm or finer.
Supports: NO SUPPORTS REQUIRED.
Important: For aquatic (water-retaining) applications, the printed plugs MUST be supplemented with a rubber or silicone gasket to ensure a reliable, leak-proof seal.
These parts require proper cleaning and careful installation to ensure a perfect seal and finish.
Supports: NO SUPPORTS REQUIRED. The design is optimized for support-free printing.
Hollowing: Not required. Print solid.
Assembly: No glue required. The plug twists into the port; the cap pushes onto the plug.
Fitting: Ensure the port hole in your enclosure is clean.
Gasket (Aquatic Use): Slide the rubber gasket onto the plug before insertion.
Sealing: Firmly twist the Plug component into the port opening by hand.
Finish: Push the Cover Cap onto the exposed section of the plug for a smooth, finished look.
Before placing these components into your habitat, wash them thoroughly with hot, non-soapy water. A final thorough rinse is mandatory.
The following materials are required to complete the functional connection system and are not included with the STL files.
Rubber/Silicone Gaskets: MANDATORY for aquatic use (terrariums with standing water or misting systems) to ensure a reliable, leak-proof seal around the plug.
Keeping our designs current and addressing user feedback is a priority. This tab will track all official updates to the STL files found in this download.
Date: 12/2/2025
Notes: Initial Release. Clean STL files provided for 2-part set (Plug and Cover Cap), optimized for support-free printing.
Please confirm you want to block this member.
You will no longer be able to:
Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.
Responses