⚙️ Recommended Print Settings
This print requires careful support placement to ensure the small, delicate branches print successfully.
FDM/Filament Settings (Recommended for Structure & Size)
-
Material: PETG or ABS/ASA are recommended for high-humidity vivarium environments. PLA is acceptable for dry terrariums.
-
Layer Height: 0.16 mm – 0.2 mm.
-
Infill Density: 10-15%.
-
Wall/Perimeter Count: 3.
-
Orientation: Print the model vertically for best detail on the trunk. Supports are REQUIRED for all branches and overhangs. Use tree supports or soluble supports for easiest removal.
SLA/Resin Settings (Recommended for Detail)
-
Material: Standard UV Resin (Brown or Wood color).
-
Layer Height: 0.05 mm or finer.
-
Orientation: Print the model vertically for best detail on the trunk. Supports are REQUIRED for the branches and any overhanging details. Use light-to-medium auto-supports.
-
Preparation: No hollowing or drainage holes needed.
Important: Always thoroughly clean your final print before placing it in any animal habitat. Pay careful attention to support removal to avoid damaging the delicate branches.
Responses