Slash into a world of thematic decor with the Art The Clown Santa Bust Decor! This highly detailed headpiece brings a fun, chilling pop-culture element to your habitat. The design is optimized for simple printing and can be used in both aquariums and terrariums, provided the model is printed in the correct material and properly sealed.
Due to the fine sculpting, painting is recommended to bring out the detail and vibrant clown colors. This model requires minimal supports or no glue.
Share This Design:
This structural print is designed for a specific vertical orientation for the best surface texture and layer adhesion. No sealing is required.
Material: PETG or ABS/ASA is recommended for high-humidity vivarium environments.
Layer Height: 0.2 mm.
Infill Density: 10-15%.
Wall/Perimeter Count: 3.
Orientation (CRITICAL): Print the model flat on its base for maximum stability. Minimal supports may be required beneath small overhangs, depending on your cooling performance.
Material: Standard UV Resin (Grey or Sandstone color).
Layer Height: 0.05 mm or finer.
Orientation (CRITICAL): Print flat on its base. Minimal support may be required depending on the specific model orientation and any fine details.
Important: Always thoroughly clean your final print before placing it in a viarium. Avoid using metal-filled or abrasive filaments. For long-term use, ensure your chosen material is chemically stable in water.
This simple print requires no assembly, only cleaning for safety.
Hollowing: Not required. I still recommend it for optimizing filament use and will make it easy to sink the decor in water.
Assembly: No glue or assembly required. This prints as a single, complete piece.
Before introducing the hideout to your terrarium, wash it thoroughly with hot, non-soapy water. This removes any release agents (Resin) or printing oils/dust (FDM) that could harm the inhabitants. A final thorough rinse is mandatory.
The following materials are required to complete the functional connection system and are not included with the STL files.
Keeping our designs current and addressing user feedback is a priority. This tab will track all official updates to the STL files found in this download.
Date: 12/31/2025
Notes: Initial Release. Clean STL file provided. Single-piece design, optimized for minimum-support printing.
Please confirm you want to block this member.
You will no longer be able to:
Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.
Responses