Achieve a sleek, low-profile look for your Bantamarium with the Slim Lid for Bantamarium V2 MINI Tanks. This essential modular component offers maximum visibility and is designed for easy top access while maintaining compatibility with all Bantam V2 MINI enclosures.
Ideal for habitats where height is limited & aesthetic is preferred. This structural component requires no supports during FDM printing and no assembly after printing.
Share This Design:
Dimensional accuracy is critical for these connectors to prevent leaks. Water-safe materials are mandatory.
Material: PETG or ABS/ASA are highly recommended due to the water contact and need for durability.
Layer Height: 0.2 mm or 0.16 mm. Use a finer layer height for better threading/fitting surfaces.
Infill Density: 20-30%. Necessary for structural integrity under hose pressure.
Wall/Perimeter Count: 4. Crucial for strength and preventing porosity.
Supports (CRITICAL): Supports are NOT REQUIRED.
SLA/Resin Settings (Recommended for Detail)
Material: ABS-Like UV Resin (ensure it’s structurally sound).
Layer Height: 0.05 mm or finer.
Supports (CRITICAL): Supports are NOT REQUIRED.
Calibration: Ensure your resin printer is calibrated for minimal dimensional shrinkage.
Important: Dimensional calibration is essential! We recommend printing a test piece before batch printing to ensure everything fits tightly.
These parts require proper cleaning and careful assembly to prevent leaks.
Supports: Supports are NOT REQUIRED.
Hollowing: Not required. Print solid.
Assembly: No glue required. The connectors are designed to be a tight push-fit onto the 10mm hose.
Before placing these components into your habitat’s water system, wash them thoroughly with hot, non-soapy water. A final thorough rinse is mandatory.
No additional materials are required for this STL file.
Keeping our designs current and addressing user feedback is a priority. This tab will track all official updates to the STL files found in this download.
Date: 12/13/2025
Please confirm you want to block this member.
You will no longer be able to:
Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.
Responses