Liking This File Will Add It to My Favorites:

Easy Project, Habitats

Bantam V2 Springtail MINI Tank

Efficiently cultivate essential feeder insects with the B-V2 Springtail Terrarium Kit! This modular, multi-part kit provides all the structural components needed to build a fully enclosed breeding habitat optimized for springtails or other microfauna.

The design prioritizes excellent humidity retention and easy access for harvesting. This customizable kit requires Max Strength Construction Adhesive and acrylic glass tubing for final assembly, resulting in a durable, stackable, and fully functional cultivation unit.

Download This STL File

(Non-Commercial License)

—– OR —–

Memberships starting at $14/month

-Unlimited Downloads

-Commercial License Available

-Cancel Anytime

_
Get Unlimited Downloads

Share This Design:

Recommended Settings

Assembly & Installation

Changelog

Recommended Settings

⚙️ Recommended Print Settings

This kit uses several structural components. Dimensional accuracy for assembly and material choice for safety are crucial.

FDM/Filament Settings (Recommended for Structure & Size)

Material: PETG or ABS/ASA is strongly recommended for structural integrity, dimensional stability, and resistance to humidity/moisture.
Layer Height: 0.2 mm.
Infill Density: 20%. Provides necessary structural strength.
Wall/Perimeter Count: 4. Crucial for strong seams for assembly.
Supports: Supports are REQUIRED for parts with internal overhangs or magnet recesses.

SLA/Resin Settings (Recommended for Detail)

Material: ABS-Like UV Resin (ensure structural integrity).
Layer Height: 0.05 mm or finer.

Supports: Supports are REQUIRED for parts with internal overhangs or magnet recesses.

Calibration: Dimensional accuracy is key for component fit.

Important: Dimensional calibration is crucial for accurate assembly. A snug fit is required before gluing sections together

Assembly & Installation

🛠️ Preparation & Post-Processing Steps

This product requires multiple mandatory preparation steps in the slicer, assembly with a pump, and a mandatory painting process.

Assembly (Glue Required)

Reference Diagram: Consult the Exploded Diagram in the image gallery for the correct sequence and orientation of all parts. Remember to remove preinstalled support from the glass trim before installing.
Part Joining: Glue all large structural components together (including trims, sponges, caps, & base trim) using Max Strength Construction Adhesive to form the main frame.
Panel Installation: Glue the clear acrylic or polycarbonate panels into their designated slots.

Curing (CRITICAL)

Cure Time: Allow a MANDATORY 48-HOUR CURE TIME in a well-ventilated area to prevent white residue (“fogging”) on the enclosure walls.

Cleaning (CRITICAL)

Before introducing the assembled habitat to animals or plants, wash it thoroughly with hot, non-soapy water. A final thorough rinse is mandatory.

📦 Required External Tools

The following materials are required to complete the functional connection system and are not included with the STL files.

Max Strength Construction Adhesive, Clear: This is the safest, strongest, clearest glue for vivarium use.
Clear Acrylic Tubing 115mm (ID) x 120mm (OD): The height of the pipe can be cut to your preference (Mine are 6 inches tall). If another diameter pipe is used, remember to size up the STL files to match (I typically will print only the base trim and test fit until I figure out the exact percentage increase and print the rest at that scale).
Clear Acrylic Circle Disc: These are used for the Glass Tops.
Bantamarium Logo Tag & Holder Set: These are the STL files needed for the front Bantamarium logo.
Bantamarium Port Plug & Plug Cap: These are the STL files needed to close off the side ports on the lid and base.
Bantam Species-Specific Substrates: We offer our own selection of species-specific soils and other substrates to support our shop.

Changelog

📝 Changelog

Keeping our designs current and addressing user feedback is a priority. This tab will track all official updates to the STL files found in this download.

Version V1.0

Date: 12/13/2025

Notes: Initial Release. Clean STL files provided for the complete multi-part habitat kit. Assembly required.

Ask Questions, Give Feedback, Show Us How It Turned Out...

Responses

You must be logged in to post a comment.