Liking This File Will Add It to My Favorites:

Components, Easy Project, Terrarium

Bantam V2 Vented Base MINI

Start your custom habitat build with superior airflow using the Vented Base for Bantamarium V2 MINI Tanks. This foundational modular component is designed to securely hold your clear acrylic cylinder and features enhanced bottom ventilation slots, secure plug ports, and a dedicated slot for a liquid feeder.

This base is essential for species requiring good cross-ventilation from the lower end of the tank. Due to the recessed interior ledge and precise fitting grooves, supports are required for successful printing.

Download This STL File

(Non-Commercial License)

—– OR —–

Memberships starting at $14/month

-Unlimited Downloads

-Commercial License Available

-Cancel Anytime

_
Get Unlimited Downloads

Share This Design:

Recommended Settings

Assembly & Installation

Changelog

Recommended Settings

⚙️ Recommended Print Settings

Dimensional accuracy is critical for these connectors to prevent leaks. Water-safe materials are mandatory.

FDM/Filament Settings (Recommended for Structure & Size)

Material: PETG or ABS/ASA are highly recommended due to the water contact and need for durability.
Layer Height: 0.2 mm or 0.16 mm. Use a finer layer height for better threading/fitting surfaces.
Infill Density: 20-30%. Necessary for structural integrity under hose pressure.
Wall/Perimeter Count: 4. Crucial for strength and preventing porosity.
Supports (CRITICAL): Supports are NOT REQUIRED.

SLA/Resin Settings (Recommended for Detail)

Material: ABS-Like UV Resin (ensure it’s structurally sound).
Layer Height: 0.05 mm or finer.
Supports: SUPPORTS ARE REQUIRED for the port and liquid feeder sponge slots.
Calibration: Ensure your resin printer is calibrated for minimal dimensional shrinkage.

Important: Dimensional calibration is essential! We recommend printing a test piece before batch printing to ensure everything fits tightly.

Assembly & Installation

🛠️ Preparation & Post-Processing Steps

These parts require proper cleaning and careful assembly to prevent leaks.

Slicer Preparation

Supports: SUPPORTS ARE REQUIRED for all recessed slots and ports. Remove them carefully post-print.
Hollowing: Not required. Print solid.
Assembly: NO ASSEMBLY REQUIRED for the main base.

Optional Assembly (Sponge/Feeder)

Sponge Insertion: Press the liquid feeder sponge (not included) firmly into its designated slot.
Optional Glue: For permanent placement, use a small drop of aquarium-safe glue (cyanoacrylate) to secure the sponge/feeder in the recess. Do not use glue if you intend to remove the sponge for cleaning or replacement.

Cleaning (CRITICAL)

Before placing these components into your habitat’s water system, wash them thoroughly with hot, non-soapy water. A final thorough rinse is mandatory.

📦 Required External Tools

The following components fit into this base but are not included with the STL file.

Max Strength Construction Adhesive, Clear: This is the safest, strongest, clearest glue for vivarium use.
Liquid Feeder Slot Sponges: These are used for the liquid feeder.
Liquid Feeder: These are the STL files needed for the liquid feeder.
Bantamarium Logo Tag & Holder Set: These are the STL files needed for the front Bantamarium logo.
Bantamarium Port Plug & Plug Cap: These are the STL files needed to close off the side ports on the lid and base.

Changelog

📝 Changelog

Keeping our designs current and addressing user feedback is a priority. This tab will track all official updates to the STL files found in this download.

Version V1.0

Date: 12/13/2025
Notes: Initial Release. Clean STL file provided for the low-profile modular base.

Ask Questions, Give Feedback, Show Us How It Turned Out...

Responses

You must be logged in to post a comment.