Keep your terrarium and vivarium glass spotless with the CritterClear Duo Magnetic Glass Wiper Set! This two-piece tool kit includes a 1-inch curved wiper for large surfaces and a mini knob wiper perfect for hard-to-reach areas and tiny enclosures.
The design is engineered for support-free printing, making setup fast. Assembly requires magnets and felt fabric (not included) to create a highly effective, customizable cleaning tool. Say goodbye to streaks and smudges!
Share This Design:
This is a utility tool that requires structural integrity and dimensional accuracy for the magnet recesses.
Material: PLA is perfectly acceptable for this tool; PETG or ABS/ASA are ideal for better durability and moisture resistance.
Layer Height: 0.2 mm.
Infill Density: 100%. Provides necessary rigidity for the handle and magnet mounting area.
Wall/Perimeter Count: 3.
Supports: NO SUPPORTS REQUIRED (Except for the Magnetic Glass Wiper MINI Knob).
SLA/Resin Settings (Recommended for Detail)
Material: Standard UV Resin (ensure structural integrity).
Layer Height: 0.05 mm or finer.
Supports: NO SUPPORTS REQUIRED.
Important: Dimensional calibration is essential! The magnet recesses must fit your magnets snugly for a secure attachment.
This product requires crucial assembly, an extended curing period for the glue, and the application of the cleaning material.
Preparation: Print both the curved wiper and the mini knob. Wash and dry thoroughly.
Magnet Placement: Insert the magnets (ensure correct polarity on corresponding pieces!) into the designated recesses.
Gluing: Use aquarium-safe super glue (cyanoacrylate) to secure the magnets permanently.
Felt Application: Cut the felt fabric to fit the wiper side. Glue the felt securely over the magnet recesses on the cleaning side of the tool.
The glue must be fully cured before the magnets are used on glass.
Cure Time: MANDATORY 48-HOUR CURE TIME. Cyanoacrylate glue releases a vapor during curing that can cause white residue (“fogging”) to permanently stain acrylic and glass surfaces.
Method: Allow the assembled wipers to cure in a well-ventilated area, away from your enclosure, for a minimum of 48 hours.
Before placing these components into your habitat, wash them thoroughly with hot, non-soapy water. A final thorough rinse is mandatory.
The following materials are required to complete the functional connection system and are not included with the STL files.
Keeping our designs current and addressing user feedback is a priority. This tab will track all official updates to the STL files found in this download.
Date: 12/2/2025
Notes: Initial Release. Clean STL files provided for 2-piece wiper set and optimized for support-free printing. Requires a magnet and felt assembly.
Please confirm you want to block this member.
You will no longer be able to:
Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.
Responses